(as of Jan 05,2021 17:57:31 UTC – Details)
3 in1 Multi-function： This fish tank siphoncleaning tool can be used for water changes, sand washing and dirt suction. No need to touch dirty water with your hands.Unique Design: This aquarium gravel & sand cleaner is the latest design with more power suction power to provide a better user experience. The handle patented design provides a more comfortable grip.Adjustable Length Design : Clean and Fill Aquarium Maintenance System with 2 extension tubes for a total length of 40.9 inch. It can be extended from 22.4 inch to 40.9 inch. Applied to depth below 31.5inch aquariums.
The principle of this sand cleaner is gravity. The water outlet must be at least 19inch lower than the water inlet when you use this gravel cleaner.Due to manual measurement and length conversion, 0.1-0.5in error is allowed, please in kind prevail.Due to the different strength of each person, and the size and water depth of the fish tank, there is no clear Drain Flow Rate. Please refer to the actual operation.When washing sand: If the filter from your fish tank is powerful, you can put the outlet hose into the fish tank, and the sand is circulated in the tank without draining water. If not, it is recommended that you remove turbid water directly from the tank and change clean water.
Sand Washing Operation:
To isnert the tube into the sand to suck the sand (not too much);Slightly lift the equipment to move the sand horizontally for wash;Lift the height of the tube again to return the washed sand;The sand washing is circulated in this way.
1 *Air-pressing control body2 *Extension Inlet Tube1 *Extension tube connector1 *User Manual; 1 *Duckbill suction inlet(Debris vacuum)1 *Outlet hose1 *Water Flow Clamp 1 *Fixture clamp
79in high-quality PVC material hose,18mm/0.7in outer diameter, 14mm/0.55in inner diameter.
According to the size of the fish tank, you can use one tube or two.
Fixture clamp, avoid loose water pipes and water flowing out.
Water Flow Control, easily adjust water flow(can be used according to your needs).
How to use the water hose control clamp:
1. Pull to the left;
2. Put in the water hose;
3. Press the bottom of both sides to fasten the water hose in the middle;
4. Pull to the left, take out the water hose.
【Working Principle】: Manual air-pressing. The upgraded part is equipped with a handle, which has more operating space and saves labor and brings convenience, by testing the fastest speed is to press 7 times. Sand Washer has 2 thickened airbags inside, which can pump water quickly. And using PP ABS materials, resistance to extrusion, do not worry about airbag damage and leakage, can be used for a long time.
【Easy to Use】: Push the siphon switch of the aquarium siphon vacuum cleaner several times, and make sure that the inlet tube part is full of water, and then observe the outlet hose. After the water continuously flows out, you can stop push and observe whether it will automatically. If not, continue to operate until the water will flow out quickly and automatically. The sand can move up and down in the extension tube to remove debris from your aquarium.
【Accessories Include】:1 *Air-pressing control body; 2 *Extension Inlet Tube; 1 *Extension tube connector; 1 *User Manual; 1 *Duckbill suction inlet(Debris vacuum); 1 *Outlet hose(79inch PVC Hose),the water pipe can be cut according to demand; 1 *Water Flow Clamp(Flow Control),easily adjust water flow; 1 *Fixture clamp(Water pipe clamp), freely fix, free your hands.
【Wide Application】: Aquarium Vacuum Gravel Cleaner is suitable for various types of fish tanks, with spliced extension tubes, two-stage splicing combination, both large and small tanks are suitable, and extension tube can be installed according to demand.Four basic combinations(excluding handle length):2 tubes(31.4inch);2 tubes + head(34inch);1 tube(16inch);1 tube + head accessories(18inch).